超聲波清洗機非常一開始是用來做實驗，或者是工業生產用的，現在也開始在日常生活中使用了，就好比清洗眼鏡、假牙、首飾等等，效果非常的好。但是對于外行來說，可能不是很了解超聲波清洗機，下面就一起來看看吧。

Ultrasonic cleaning machines were originally used for experiments or industrial production, and now they are also being used in daily life, such as cleaning glasses, dentures, jewelry, etc., with very good results. But for beginners, they may not be very familiar with ultrasonic cleaning machines. Let's take a look together below.

1、超聲波清洗機靠什么清洗

1. What does an ultrasonic cleaning machine rely on for cleaning

用超聲波清洗機清洗物品一般是用清水，當然有時候也會放一些去除油污的試劑，但是總的來說是利用液體來清洗物體的。

The ultrasonic cleaning machine is usually used to clean objects with clean water, although sometimes some oil removal reagents may be added. However, in general, liquid is used to clean objects.

2、超聲波清洗機頻率的調控

2. Regulation of Ultrasonic Cleaning Machine Frequency

調節好頻率是非常重要的，頻率高，產生的力度就越大，清洗的效果就好，但是不同的物品適合不同的頻率。

Adjusting the frequency is very important. The higher the frequency, the greater the force generated, and the better the cleaning effect. However, different items are suitable for different frequencies.

3、超聲波清洗機的溫度

3. Temperature of ultrasonic cleaning machine

超聲波清洗機非常好是在30℃-40℃時使用，當如果溫度過高，有可能燒壞控制板，但是溫度太低，清洗效果又會不太理想，所以溫度要控制好。

It is best to use an ultrasonic cleaning machine between 30 ℃ and 40 ℃. If the temperature is too high, it may burn out the control board. However, if the temperature is too low, the cleaning effect may not be ideal, so the temperature should be controlled well.

所以，如果要使用超聲波清洗機的話，對這些常識一定要了解，這樣才能更好的進行使用。

So, if you want to use an ultrasonic cleaning machine, you must understand these common knowledge in order to use it better.